6-19. TRANSMISSION REPAIR. (Continued)
e. Transmission Assembly.
(b) Shaft slot face must be at least flush with
(1) Lower the countergear (18) into the case until it
rests on the bottom of the case (23).
(3) Install mainshaft assembly (5) into case with
rear of shaft protruding out of rear bearing hole
Place reverse idler gear (22) in transmission
case (23) with gear teeth toward the front.
(a) Position mainshaft rear bearing installer in
(a) Ensuring the slot in the end of the shaft is
clutch gear case opening and engage front
facing down, install the idler gear shaft (25)
from rear to front.