6-19. TRANSMISSION REPAIR. (Continued)
(3) Remove clutch countergear rear retaining ring
d. Countershaft Disassembly.
Remove front countergear retaining ring (41)
(4) Remove 3rd. speed countergear spacer (44).
and thrust washer (42). Discard snap ring (41).
(2) Install countergear rear bearing remover on the
(5) Position assembly on an arbor press and press
countershaft with the open side facing the
shaft from 3 speed countergear (45).
spacer. Support assembly in an arbor press and
press countershaft out of clutch countergear
assembly (18). Countergear is a slip fit and
pressing may not be required.