6-19. TRANSMISSION REPAIR. (Continued)
Remove rear bearing retainer (2) and gasket
(10) Remove countergear rear bearing retaining
rings (11 and 12) from shaft and bearing (13). Remove
countergear rear bearing using countergear rear bearing
Slide speedometer drive gear (4) off the
remover, and bearing puller.
This allows the
countergear assembly to rest on the bottom of the case.
Remove drive gear bearing retainer (6) and
(11) Remove drive gear bearing outer race to case
retaining ring (14).
(8) Remove countergear front bearing cap (8) and
Pry countergear front bearing (10) out by
inserting a countergear front bearing remover
through the cast slots in the case.