TM 5-4210-224-14 & P
4-244. REAR AXLE ASSEMBLY REPLACEMENT (Continued).
a. Position the rear axle under the vehicle. Align
the axle assembly with the springs.
b. Install spacers, (6), spring plates (5), and U-
bolts (4) to the axle assembly. Raise the axle
c. Install washers and nuts (3) to the U-bolts.
Thread the nuts on firmly. Adjust the alignment
of the semi-float axles.
d. Install the stabilizer shaft.
e. Connect the height sensing and brake
proportional valve linkage (paragraph 4-211).
f. Connect the vent hose to the axle vent fitting.
g. Connect shock absorbers to the axle brackets
h. Connect hydraulic brake lines to the connectors
i. Connect the parking brake cable to the lever
and flange plate (paragraph 4-214).
j. Install brake drum (1) hub and drum assembly.
k. Install the propeller shaft (paragraph 4-186).
l. Fill axle housing (2) with lubricant (Appendix D,
m. Install the wheel assembly (paragraph 4-203).
n. Lower the vehicle.