 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4210-224-14 & P
4-238. LEAF SPRING AND BUSHING REPLACEMENT. (Continued)
INSTALLATION
a. Press a new bushing into the spring eye making
sure the tool presses on the steel outer shell of
the bushing.
NOTE
Bushing must protrude an equal
amount on either side of the spring
eye when properly installed.
b. Install the shackles (4) into the spring (1) with
the spacer (7), bushings (6), washers (3), bolt
(5) and nut (2).
NOTE
Do not tighten at this time.
c. Install the upper spacer (16) onto the spring (1).
d. Install the spring into the hanger with the bolt
(17), washers (13) and nut (12).
NOTE
Do not tighten at this time.
e. Install the spring into the frame by placing the
bushings (6) and the spacer (7) into the frame,
inserting the shackle (4) into position and
attaching bolt (5), washer (3) and nut (2).
4-336
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals