SPINDLE REPLACEMENT

TM 5-4210-224-14 & P

4-235. WHEEL HUB BOLT REPLACEMENT. (Continued)

e. Install the hub/rotor to the vehicle (paragraph 4-

218).

f. Install the wheel and tire assembly (paragraph

4-203).

g. Torque the wheel stud nut to 140 ft-lbs (190

N.m).

4-236. SPINDLE REPLACEMENT. (Continued)

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

Equipment Condition

Para

Condition Description

Jack

Jack Stand

4-203

Wheel Assembly Removed

Driver Handle

4-218

Wheel Hub/Rotor Removed

(J-8092)

Bearing Installer

General Safety Instructions

(J-21465-17)

Engine OFF

General Mechanics Tool Kit

Transmission in (N) neutral.

Mallet

Parking brake and micro-brakelock set

Materials/Parts

Grease, Lubricating

Spindle (14009626)

REMOVAL

a. Remove the spindle (5) from the steering

CAUTION

knuckle (11) by removing the nuts (1), washers

Be sure that the vise jaws do not

(2), plate (3), and bracket (4).

damage the machine surface of

b. Tap the end of the spindle (5) with a plastic or

the spindle.

rubber mallet to break it loose from the steering

knuckle (11).

c. Remove spindle components by securing the

spindle in a

4-330