4-218. FRONT DISC BRAKE AND LINING REPLACEMENT (Continued).
c. Mark the relationship of the wheel to the hub.
d. Remove the wheel
e. Position C clamp (1) and tighten until the piston
bottoms in its bore.
f. Remove the C clamp.
g. Remove the bolt (2).
h. Remove the support key (3) and spring (4) by
using a brass punch (5) and a hammer to drive
the support key out.
i. Remove the caliper assembly.
j. Suspend the caliper from the suspension.
Do not allow the brake components
to hang from the flexible hoses as
damage to the hoses may occur.
k. Remove the inboard pad (6) from the steering
knuckle or rear caliper support.
1. Remove the anti-rattle spring (7).
m. Remove the outboard pad (8).
n. Check the inside of the caliper assembly for
signs of fluid leakage.
o. Remove the hub and rotor (9).