4-217. HYDRAULIC BRAKE BOOSTER SERVICE.
This task covers:
General Safety Instructions
Transmission in (N) neutral.
Parking brake and micro-brakelock set.
Power Steering Fluid
(Appendix D, Item 14)
The power steering fluid and brake
fluid cannot be mixed. If the brake
seals contact steering fluid or the
steering seals contact brake fluid,
seal damage will result.
Whenever the booster system is
removed and reinstalled, the
steering system should be bled.
a. Fill the power steering pump reservoir (1) to the
proper level and let the fluid remain undisturbed
for at least two minutes.
b. Start the engine and run momentarily.
additional fluid if necessary.
c. Repeat steps a and b until the fluid level
remains constant after running the engine.
d. Raise the front of the vehicle so the wheels are
off the ground and support the vehicle with
suitable jack stands.