 |
|||
|
|
|||
|
Page Title:
PARKING BRAKE CABLE REPLACEMENT. |
|
||
| ||||||||||
|
|
 TM5-4210-224-14&P
4-212. PARKING BRAKE CABLE REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SET-UP
Materials/Parts
Tools
Cable (14064667)
Jack
Jack Stand
General Safety Instructions
General Mechanics Tool Kit
Engine OFF.
Transmission in (N) neutral.
Parking brake and micro-brakelock set.
REMOVAL
a. Raise the vehicle and support with a suitable
jack stand.
b. Remove the nut (1) from the equalizer (2).
c. Remove the connector (3) from the front cable.
d. Bend the retaining fingers ( 4 and 5) and
remove the cable from the brake pedal
assembly.
e. Remove the cable assembly (6).
INSTALLATION
a. Install the cable assembly, making sure all the
retaining fingers (4 and 5) are completely
through the holes.
b. Install the cable (6) to the pedal assembly.
c. Install the connector (3).
d. Install the nut (1) onto the equalizer (2)
e. Adjust the parking brake (paragraph 4-214).
f. Remove the jack stands and lower the vehicle.
4-293
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals