CLUTCH MASTER CYLINDER AND RESERVOIR REPLACEMENT.

TM 5-4210-224-14&P

4-195. CLUTCH ASSEMBLY REPLACEMENT. (Continued)

d. Remove clutch fork (6) from ball stud (8).

e. Remove retainer (9) out of clutch fork (6) if worn

or damaged.

f. Remove ball stud (8).

INSTALLATION

Install ball stud (8) and pack with grease

Install new retainer (9) into clutch fork (6) if

removed.

Install boot (5), clutch fork (6), and release

e. Install clutch housing cover (2) and secure with

bearing (7).

screws (1).

Install flywheel housing (4) and secure with

screws (3).

4-196. CLUTCH MASTER CYLINDER AND RESERVOIR REPLACEMENT.

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

General Mechanics Tool Kit

General Safety Instructions

Engine OFF.

Material/Parts

Transmission in (N) neutral.

DOT 3 Brake Fluid

Parking brake and micro-brakelock set.

Batteries disconnected.

Master Cylinder (15537761)

REMOVAL

c. Disconnect master cylinder push rod (3) and remove

wave washer (4).

a. Remove lower steering column covers.

d. Remove reservoir hose (5).

b. Remove retainer (1) and washer (2).

e. Disconnect secondary cylinder hydraulic line (6) from

the master cylinder (7).

4-266