4-192. TRANSMISSION ASSEMBLY REPLACEMENT. (Continued)
Install the two bottom screws before
removing the guide pins.
e. Torque the bolts to 74 ft-lbs (100 N-m).
Position the crossmember to the frame and
install attaching bolts, torque to 55 ft-lbs (75
g. Install transmission mount to crossmember bolts
and torque to 40 ft-lbs (54 N.m).
Position transfer case to adapter and install
attaching bolts, torque to 40 ft-lbs. (54 N-m)
Connect propeller shafts to transfer case and
torque bolts to 70-80 ft-lbs (95-110 N-m).
Connect the exhaust pipes to the exhaust
manifold and torque to 15 ft-lbs (20 N.m)
p. Install transmission shift lever by inserting lever
(1) and pushing the cap (2) down and turning
m. Install the drain plug (2) and fill the transmission
case with new transmission oil (Appendix D,
Item 32) to the level of the fill plug hole.
Install the boot (3) by sliding the boot and
retainer (4) down the shift lever and installing
n. Install fill plug (1) and torque to 17 ft-lbs (23 N-
the boot attaching screws (5) and retainer
o. Remove supports and lower vehicle.