4-183. CHASSIS ELECTRICIAL SYSTEM REPLACEMENT.
This task covers:
General Safety Instructions
General Mechanics Tool Kit
Transmission in (N) neutral.
Parking brake and micro-brakelock set.
a. Position new wiring harness in vehicle and
a. Locate the harness which is being replaced and
reconnect the various branch circuits and
remove by bending or cutting open the various
clips retaining the harness.
b. Insert harness in retaining clips and secure by
b. Disconnect the harness from the sockets and
bending or securing clips back into position.
various branch circuits.
c. Reconnect the battery cables.
c. Remove harness.
FIGURE 4-2 CHASSIS ELECTRICAL SYSTEM (Sheet 1 of 2)