4-179. WINDOW REGULATOR REPLACEMENT.
This task covers:
General Mechanics Tool Kit
Trim Panel Removed
General Safety Instructions
(Appendix D, Item 28)
Transmission in (N) neutral.
Parking brake and micro-brakelock set.
a. Raise the window and tape the glass in the full
up position using cloth body tape.
b. Remove door panel to regulator bolts (1).
Remove window regulator (2) by sliding
regulator rearward, disengaging rollers from sash panel
(3) at the notch in the sash panel.
d. Collapse the regulator and remove it through the
access hole in the door.
a. Lubricate the regulator (2), the sash (3) and
regulator rails (4) with lubriplate (Appendix D, Item 28).
b. Collapse the regulator (2) and place it through
the access hole in the door.
c. Unfold the regulator (2) and engage the forward
e. Engage the lower roller to the regulator rail (4).
roller to the sash channel at the sash channel notch.
f. Slide the regulator (2) into its proper position and
d. Slide the regulator rearward to engage the rear
insert the regulator drive through the door panel.
roller to the sash channel.
g. Install the door panel to regulator bolts (1).