4-163. OUTSIDE DOOR HANDLE REPLACEMENT (Continued).
Install the small gasket (6) between the door
Remove the handle (5) with the control rod
and the handle.
(2) from the door.
Install the door outside handle screw (4) to
Remove the gaskets (6) and (7) from the
the other side of the handle and tighten both
Install the large gasket (7) over the lock rod
Connect the outside door handle to lock rod
(2) and onto the handle (5).
to the lock assembly.
Install the handle with the lock rod onto the
Install the clip (1) onto the lock rod by
pivoting the clip up and onto the lock rod.
Loosely install the door to outside handle
Install the door trim panel (paragraph 4-
screw (4) to the push button side of the
4-164. INSIDE DOOR HANDLE REPLACEMENT.
This task covers:
General Mechanics Tool Kit
Para. Condition Description
4-176 Door Trim Panel Removed
General Safety Instructions
Transmission in (N) neutral.
Parking brake and micro-brakelock set.
Remove door handle seal (1).
Remove handle to door screws (2).
Slide the clip (3) so that the large diameter
slot is in line with the lock rod, then pull the
rod (4) disconnecting it form the handle (5).
Remove the inside handle from the door.