4-162. DOOR LOCK CYLINDER REPLACEMENT (Continued).
Install the door trim panel (paragraph 4-
ing clip (1) out of engagement with the lock
Install inside door handle (paragraph 4-164).
Remove the lock cylinder (2) and gasket (3)
from the door.
Position the lock cylinder (2) with gasket (3)
to the door, making certain that the lug of
the cylinder engages the lock assembly
Install the lock cylinder retaining clip (1)
onto the cylinder.
4-163. OUTSIDE DOOR HANDLE REPLACEMENT.
This task covers:
General Mechanics Tool Kit
Para. Condition Description
4-176 Trim Panel Removed
General Safety Instructions
Transmission in (N) neutral.
Parking brake and micro-brakelock set.
Raise the window completely.
Remove the outside door handle to lock rod
clip (1) by using a flat bladed screwdriver
and pushing on the top of the clip where it is
connected to the rod (2) and pivoting the
clip away from the rod.
Disconnect the outside door handle to lock
rod (2) from the lock (3).
Remove the door to outside handle screws