4-161. DOOR LOCK REPLACEMENT (Continued).
Disconnect the inside handle to lock rod (2)
Install the door to lock assembly screws (6).
from the lock (3).
Install the inside door lock knob (5) to the
Remove the outside door handle to lock rod
clip (4) by pushing on the top of the clip
where it is connected to the rod using a flat-
Install the outside door to handle lock rod
bladed screwdriver and pivoting the clip
(2) onto the lock assembly (3).
away from the rod.
Install outside clip (3) onto the lock rod (2)
Remove the inside door lock knob (5).
by pivoting the clip up and onto the lock rod.
Remove the door to lock assembly screws
Install the inside door handle to lock rod
onto the lock assembly.
Tilt the lock assembly away from the outside
Install inside clip onto the lock rod by
lock cylinder and pull it downward to make
pivoting the clip up and onto the door
clearance for the inside lock rod.
handle rod lock.
Remove the lock assembly from the door.
Install the door trim panel (paragraph 4-
Align the inside lock rod to the hole in the
door panel then tilt the lock assembly onto
Install inside door handle (paragraph 4-164).
the outside lock cylinder.
4-162. DOOR LOCK CYLINDER REPLACEMENT.
This task covers:
Para. Condition Description
General Mechanics Tool Kit
4-164 Inside Door Handle Removed
4-176 Trim Panel Removed
Lock Cylinder (9632761)
General Safety Instructions
Transmission in (N) neutral.
Parking brake and micro-brakelock set.
Using a flat-bladed screwdriver, slide the
lock cylinder retain
Raise the window completely.