4-158. RADIATOR SUPPORT REPLACEMENT (Continued).
Remove the radiator support bolts (7).
Remove the radiator (1) support from the
Remove the radiator support to frame nuts
(2), lower retainers (3), lower cushions (4),
upper cushions (5), retainers (6), bolts (7)
and washers (8).
Remove the radiator support from the
vehicle by tilting the radiator support to the
rear and lifting it up and out of the vehicle.
Install the radiator support by lowering it into
Install the lower
the vehicle and tilting it into position.
Loosely install the radiator support to frame
Install the grille (paragraph 4-155).
washers (8), bolts (7), retainers (6), upper
cushions (5), lower cushions (4), lower
retainers (3), and frame nuts (2). Do not
Install the primary hood latch bracket
tighten at this time.
Install the sheet metal support to the
Install the headlamp assemblies (paragraph
Install the sheet metal support to radiator
Install the batteries (paragraph 4-106).
support bolts and torque to 13 ft-lbs (17
Install the radiator (paragraph 4-81).
Torque the radiator support to frame nuts
Install wheelhouse panel (paragraph 4-156).
(2) to 35 ft-lbs (47 N-m).
Install fenders (paragraph 4157).
Install the air cleaner inlet to the radiator
Reconnect battery cables.
Connect the ground wires to the radiator