4-131. CONTROL KNOBS AND INDICATOR LIGHTS MAINTENANCE. (Continued)
Remove four screws (5) attaching steering
column lower cover.
Remove steering column lower cover.
Disconnect glow plug (6) and water in-fuel
indicator (7) lights from instrument cluster
bezel by holding socket and turning counter-
clockwise 1/4 inch turn.
Remove bulbs by pulling them directly from
Remove bulb from socket by pulling it out
directly from the socket.
Repair consists of replacement of defective bulbs
and/or light control knob and rod.
Push bulb directly into socket.
Reach behind dash and position socket into
dash, then turn socket 1/4 inch turn clockwise.
Position glow-plug (6) and water in-fuel (7)
sockets into instrument cluster bezel (4) and
Position steering column lower cover into
turn socket 1/4 turn clockwise.
dash panel and secure with four screws (5).
Position instrument cluster bezel into dash
Position light control knob (1) into assembly
panel and secure with eight screws (3).
and push rod inward to secure.