4-124. WIPER MOTOR REPLACEMENT.
This task covers:
INITIAL SETUP :
General Safety Instructions
Transmission in (N) neutral.
General Mechanics Tool Kit
Parking brake and micro-brakelock set.
Para. Condition Description
4-123 Wipers Removed
Wiper Motor (22049809)
Ensure wiper motor crankarm (1) is in the "park"
Disconnect harness (2) at wiper motor (3) and
harness at washer pump (4).
Reach through access hole (5) and loosen
drive rod attaching nuts (6).
Disconnect drive rod assembly from wiper
motor crank arm (7).
Remove three attaching screws (8) and
remove motor assembly (9) and seal (10).
Reach through access hole (5) and tighten
drive rod attaching nuts (6) .
Lubricate wiper motor crank arm pivot ball (1)
prior to installation.
Connect harness (2) at wiper motor (3) and
harness at washer pump.
b. Position motor assembly (9) and seal (10) to
Install wipers (paragraph 4-123).
Reconnect battery cables.