4-122. ROOF WARNING LIGHT REPLACEMENT.
This task covers:
INITIAL SETUP :
General Safety Instructions
General Mechanics Tool Kit
Transmission in (N) neutral.
Parking brake and micro-brakelock set.
Roof Light (14-012C5B-R)
Remove three cap nuts and washers securing
wire frame (1) to roof.
Remove wire frame (1).
Open hasp (2) on housing assembly (3) and
remove lens (4).
Snap off spring-wire holders (5) from lamp
Disconnect wire assembly and remove lamp
Replace defective lamp assembly.
Connect wire assembly to lamp assemblies
(6) and position onto bracket and secure with
springwire holders (5).
Install lens (4) and secure with hasp (2)
located on housing assembly (3).
Install wire frame (1) and secure to roof with
washers and cap nuts.
Reconnect battery cables.