4-119. CAB SPOTLIGHTS REPLACEMENT. (Continued)
Remove two screws (1) from end of cap (2)
Remove end cap (2).
Remove screw attaching lamp assembly to
the inside of windshield post.
Remove screw (3), nut (4), and brace (5) from
Remove two screws securing spotlight
assembly to outside of windshield post.
Remove spotlight assembly.
Position outer spotlight assembly to cab
windshield post and secure with two screws.
Remove screw (6) from bottom of retaining
Install brace (5) to spotlight with screw (3) and
Remove retaining ring (7).
Secure inner spotlight assembly to windshield
Remove lamp (8) from housing (9). Replace
post with screw.
lamp if defective.
Connect wiring to handle.
Install end cap (2) and secure with two screws
Insert lamp (8) and wiring into housing (9).
Install retaining ring (7) on housing (9) and
Reconnect battery cables.
secure with screw (6).