4-97. TUBING AND HOSES REPLACEMENT.
This task covers:
General Safety Instructions
General Mechanics Tool Kit
Transmission in (N) neutral.
Parking brake and micro-brakelock set
Hoses as required
a. Loosen two plastic clamps (1) holding hose (2)
from oil fill pipe to CDR valve (3).
b. Remove hose (2).
c. Unsnap two clamps (4) holding hoses from CDR
valve (3) to two hoses (5 and 6).
d. Remove hoses (4 and 5).
e. Remove two tubes to intake manifold.
a. Position hose(s) with clamps attached from
tube(s) to CDR valve (3).
b. Install clamps by tightening securely.
c. Position hose (1) with clamps attached from
CDR valve (3) to oil fill pipe (2).
d. Install clamps by tightening securely.