TANK PIPING REPLACEMENT

TM 5-4210-224-14&P

4-64. TANK PIPING REPLACEMENT. (Continued)

REMOVAL

a. Remove locking screw (1) and remove pipe

assembly (2).

b. Loosen clamp (3).

c. Slide clamp (3) off pipe support (4).

NOTE

Pipe is assembled as a single unit

and must be replaced entirely.

d. Remove pipe (5).

e. Remove phillips screw (6), washer (7), and hex

nut (8) securing pipe support (4) to baffle plate.

f. Remove pipe support.

INSTALLATION

a. Secure pipe support (5) to baffle plate with

phillips screw (6), washer (7), and hex nut (8).

b. Slide hose clamp (3) over pipe (5) and locate

hose clamp on pipe support (4).

c. Tighten hose clamp screw (6) to secure pipe (5).

e. Install water tank level sending unit (paragraph

d. Install pipe assembly (2) to outlet pipe with

locking screw (1).

f. Install hose bed floors (paragraph 4-59).

CAUTION

g. Install tank fill tower (paragraph 4-58).

When installing tank cover, ensure

h. Reconnect battery cables.

plastic pipe passes through smaller

hole inside fill tower.

4-100