4-61. SIDE PANELS REPLACEMENT (Continued).
When lifting an object make sure
the hoist and sling are fastened
securely. Be sure the item being
lifted does not exceed the capacity
of the lifting device.
a. Lower side panel (1) into position with hoist and
sling and support it until installation is
b. Secure side panel (1) to brackets on frame with
three screws (2), washers (4) and nuts (3).
c. Locate angle brace between side panels and
secure with screw (2), washer (4), and nut (3).
n. Install rear warning light (paragraph 4-49).
d. Remove hoist and sling.
o. Install rear suction stub cab (paragraph 4-47).
e. Install hose bed floor and supports paragraph -
p. Install hard suction hose bracket (paragraph 4-
f. Install fill tower bracket (paragraph 4-58).
q. Install ladder bracket (paragraph 4-45).
g. Install compartment panels (paragraph 4-57).
r. Install hose bin dividers paragraph 4-28).
h. Install tread plates (paragraph 4-56).
s. Install hose rollers (paragraph 4-27).
i. Install compartment lights (paragraph 4-51).
t. Install hose bed floors (paragraph 4-26).
j. Install rear station charger (paragraph 4-54).
u. Install hose reel (paragraph 4-21).
k. Install rear platform and steps (paragraph 4-53).
v. Install ladder (paragraph 4-15).
l. Install back-up alarm (paragraph 4-51).
w. Install hard suction hose (paragraph 4-13).
m. Install back-up, turn and stop light (paragraph 4-
x. Reconnect battery cables.