4-35. WATER TANK LEVEL GAUGE REPLACEMENT. (Continued)
Install hose bin dividers (paragraph 4-28).
Install water tank level gauge (5) into pump
compartment with wire connectors at the
Install hose rollers (paragraph 4-27).
bottom and secure to plate (2) with two
Install hose bed floors (paragraph 4-26).
Install roof panel (paragraph 431).
Install compartment light (paragraph 4-30).
4-36. SUCTION AND DISCHARGE STUB CAPS REPLACEMENT.
This task covers:
a. . Removal
General Mechanics Tool Kit
Stub Cap (HCC-38-2.5)
a. Close discharge valves before removing stub
b. Remove stub cap from discharge (1) and
suction (2) stubs using a spanner wrench.
c. Remove chain from stub caps.
a. Install chain on stub caps.
b. Install discharge (1) and suction (2) stub caps
onto stubs with a spanner wrench.
c. Open discharge valves.