4-32. PUMP PANEL LIGHTS MAINTENANCE.
This task covers:
Para. Condition Description
General Mechanics Tool Kit
General Safety Instructions
Street Side Hose Rollers
Transmission in (N) neutral.
Parking brake and micro-brakelock set.
Pump Panel Light
a. Wedge a screwdriver or other similar tool
between the lens cover (1) and mounting plate
b. Twist tool and the lens cover (1) will "pop" off.
c. Remove two phillips screws (3) and locknuts (4).
d. Disconnect wire (5) from light assembly.
e. Remove mounting plate (2).
f. Remove gasket (6).
a. Repair consists of replacement of defective
bulb(s) (7) or gasket (6). To remove bulb (7),
twist 90°and pull out.
a. Install pigtail wire (5) through mounting plate (2)
and position gasket (6) and mounting plate (2) on
b. Secure with two phillips screws (3) and lock nuts
c. Position lens cover (1) and secure by pushing it
on the mounting plate (2) until it snaps in place.
d. Install street side hose rollers.
e. Reconnect batteries.