4-21. HOSE REEL REPLACEMENT. (Continued)
Remove cover (1) and disconnect control wire from solenoid (2). Remove compartment light wire.
Remove five nuts (3), lockwashers (4) and bolts (5).
Loosen and remove piping from swivel joint (6).
Slide hose reel assembly from rear compartment.
Install hose reel assembly on rear of truck.
Secure to hose body with five bolts (5), lockwashers (4), and nuts (3).
Connect and tighten piping to swivel joint (6).
Install control wiring to compartment light and hose reel motor solenoid (2).
Install cover (1).
Install hose (paragraph 4-20).
Install hose roller assembly (paragraph 4-18).
4-22. MOTOR REPLACEMENT.
This task covers:
General Safety Instructions
General Mechanics Tool Kit
Transmission in (N) neutral.
Parking brake and micro-brakelock set