4-9. LUBRICATION INSTRUCTIONS (Continued).
b. Transmission Lubrication (Continued).
Place a clean container below drain
plug (1). Remove fill plug (2), then
remove drain plug (1). Drain the
transmission fluid. Replace drain
plug (1). Using DEXRON II fluid
transmission until fluid is level with
fill plug hole. Replace fill plug (2).
Torque both drain and fill plugs to 17
ft-lbs (23 NĚ ).
c. Clutch Lubrication.
(1) Fluid Level Check. Remove cap (1) from
reservoir (2) and inspect clutch fluid level.
(2) Adjusting Fluid Level. Fluid level in the
reservoir should reach the bottom of the
diaphragm when it is in place in the
reservoir. Replace fluid as necessary.
Replace cap (1).
Do not use fluid which has been
bled from another system to fill the
(3) Fluid Recommendations. Silicone brake
fluid which meets the requirements of
military specification MIL-B-46167 are