Table 4-1. Inspection Prior To Use (Continued).
INSPECTION TO BE PERFORMED
Check cooling system level and antifreeze
protection if required.
Check engine, starter and instrumentation
wiring for proper connections and condition
of wiring insulation.
Check tension of fan and alternator drive
belts. Belts should be tight enough to
allow ½ inch deflection midway between the
Check fluid levels, adding fluid as re-
and Transfer Case
Check external hydraulic lines for evi-
dence of leakage, Tighten or replace
loose or defective fittings.
Check operation of shift selectors.
Check battery electrolyte level and state
Check battery cable connections. Tighten
Check the siren/speaker system for proper
Check the emergency beacon for proper op-
Check all lights for burned out bulbs,
loose connections, and dirty or broken
Check to insure all circuits function properly.
Check steering reservoir for proper fluid
Check axle vents to insure freedom from
Examine steering hose connections for
evidence of leakage.
Tighten as required.
Check steering stop adjustment. Adjust
Check steering system for proper opera-
tion during road test.
Chassis and Running
Check all lubricant levels.
Check tire inflation.