Quantcast Section II. SERVICE UPON RECEIPT

 

Click here to make tpub.com your Home Page

Page Title: Section II. SERVICE UPON RECEIPT
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Chapter 4. ORGANIZATIONAL MAINTENANCE INSTRUCTIONS
Up
TM-5-4210-224-14-P 250 6PM Mini-Pumper Firefighting Truck Model No.:CM-KFT-3 Manual
Next
Table 4-1. Inspection Prior To Use.
TM 5-4210-224-14&P
4-1. REPAIR PARTS (Continued).
general support maintenance for the 250 GPM Mini-Pumper Firefighting Truck.
4-2. SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT.
Special tools, TMDE, and support equipment required to maintain the 250 GPM Mini-Pumper Firefighting Truck
are listed in Appendix B, Section III.
Section II. SERVICE UPON RECEIPT
Para.
Para.
Introduction ..............................
Visual Inspection ................................ .............
Lubrication ...............................
4-3. INTRODUCTION.
This section provides instructions for readying the 250 GPM Mini-Pumper Firefighting Truck for use after initial
receipt by the using facility.
4-4. LUBRICATION.
Each truck has been completely serviced prior to shipment, with lubricants as specified for the climatic conditions
at the point of origin. Further lubrication, other than replenishment of lubricant quantities found to be deficient due
to leakage, spillage, or consumption, should not be necessary unless climatic conditions differ greatly from those of
the point of origin at the time of shipment. If such is the case, drain, flush, or otherwise remove all lubricants and
service.
4-5. VISUAL INSPECTION.
Each truck has received a thorough inspection and complete operational check prior to shipment. Regardless of
precautions taken, some damage may occur to the truck during shipment. It is therefore necessary that a complete
visual inspection be carried out upon receipt. Refer to Table 4-1 for inspections to be performed prior to use.
Record all deficiencies disclosed during the inspection procedure.  Such deficiencies should be corrected if
possible, or otherwise reported.
CAUTION
Due to the critical nature of the service for which this truck is intended, no truck should be
placed in service if there is any doubt or evidence of improper or inadequate function of any of
the components or systems. Such conditions must be reported to the supplying organization for
disposition.
4-2

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.