ENGINE - Continued
Flywheel Housing - Continued
Remove any excess sealant from the flywheel housing and the seal.
Install the oil pan, see para. 2-19.11.
Install the flywheel housing hole covers using new gaskets. Tighten capscrews to 35 ft lb (47 Nm).
Install the power steering pump pulley drive, see para. 2-19.2.
Install the alternator pulley drive, see para. 2-19.2.
Install the alternator mounting brackets, see TM 5-4210-220-12.
Secure the flywheel housing support brackets to the cylinder heads and the flywheel housing.
Install engine as detailed in para. 3-8.1.
Start and run engine and check for oil, coolant or air leaks. Tighten or remake connections as necessary.
3-140 (3-141 Blank)