|
| |
TM 5-4210-220-34
3-7.
TRANSMISSION-Continued
(1)
Position transmission front end upwards.
(2)
Locate the oil passage holes in the rear
planetary ring gear. Insert four 1/8 in.
cotter pins, ninety deg. apart, into the oil
passage holes in the ring gear until they
bottom. Pins should be greased to
retain them in position, and should be in
holes in the same plane.
(3)
Carefully
invert
the
transmission
housing, rear cover upward.
(4)
Remove
the
twenty-four
bolts
and
lockwashers that retain the rear cover
and adapter housing to the transmission
housing.
3-60
|
