Table 2-1. Operator Preventive Maintenance checks and Services (PMCS) - Continued
A - After Mission
D - Daily Checks
W - Weekly
ITEM TO BE INSPECTED/Procedure
Equipment is not
With main engine running, pull control knob out to
HEAT. Set HEATER fan to HIGH and DEFROST fan to
Pull heat flow knob and check hot air flows out of
Push in heat flow knob and check hot air flows out
of floor registers.
Check operation of all seat position levers to ensure
each seat is fully adjustable.
Check operation of seat belts and check belt fabric is
- Seat belts missing or
not torn or worn.
Check all seat and belt fasteners are tight.
- Seats loose, or any
seat adjuster falls to lock.