4-26 DRIVE LINES, POWER TRAIN
4-26.1 Front Axle to Center Bearing Drive Shaft Yoke.
This task covers
Shop Equipment, Automotive
Maintenance and Repair,
2, Appendix G Alinement Bar
Front Axle to Center Bearing Drive Shaft Removed
(see para. 4-26.3)
10, Appendix E Dry Cleaning Solvent
13, Appendix E Emery Cloth
231502 Shaft Locknut
Using a vise, clamp center bearing end
yoke (2) allowing access to the self-
locking nut (1).
Remove self-locking nut (1) and discard.
Remove the end yoke from the vise.
Support the drive shaft by lightly clamping
the tube at the center bearing end of the
shaft in the vise.
Using a mechanical puller, remove end
yoke (2) from splined shaft. When using