4-25. STEERING SYSTEM - Continued
Attach reservoir to brackets (5) using screws (3) and locknuts (4). Tighten nuts to 35 ft lb (48 Nm).
Install hoses (6, 7, and 8). Tighten clamp (9) only enough to secure hose and prevent leaks.
Install drain plug (14) and tighten securely.
Refill reservoir as detailed in Lube Order LO 5-4210-220-12.
Start engine and check hose connections for leaks. Tighten fittings as necessary.
Turn steering wheel fully right and fully left. After a couple of turns the steering motion should become
Stop the engine and check the reservoir dipstick. Top up the reservoir as required.