4-24. ELECTRICAL SYSTEM - Continued
4-24.8 Truck Lights - Continued
c Licence Lamp Replacement - Continued
Install new lamp wire through body panel
and connect to harness. Aline mounting
holes and install backing plate using
Install new bulb (3).
Install lens (2) and retain with screw (1).
Check lamp operates.
d. Engine and Hose Body Compartment Lamp
No. bulbs are installed in these lamps, they are
"sealed beam" type unit.
For lamp hood replacement, twist lamp
while pushing in. Pull out lamp, unplug
pigtail, and replace lamp.
For lamp base replacement remove
screws (2) and lift lamp base from
Unplug pigtail (4).
Remove lamp from new base. Secure
base to support using screws (2). Do not
overtighten. Be sure to attach pigtail
ground wire to one of the mounting
Plug pigtail into new lamp and install lamp
in base with a twist.