4-14. HOSE REEL ASSEMBLY - Continued
Remove screws (1), washers (2) and nuts (3) attaching cover (4) to hose body compartments.
Lower cover (4) and disconnect heater hose (5).
Inspect rubber deflector, item (6 ). If a deflector is damaged or has deteriorated from prolonged use
it should be replaced.
Inspect reel cover (4) Be sure it is in good condition before reusing. Minor damage may be repaired,
see REPAIR following.
Inspect weather stripping (8) on upper edges of cover. Repair or replace as necessary to provide
good sealing when cover is reinstalled.
Attach heater hose (5) to cover and install cover (4) using screws (1), washers (2), and new locknuts (3).
Tighten nuts to 50 in. lb (5.6 Nm).