CAB - Continued
4-12.6 Transmission Shift Control.
This task covers
MATERIALS / PARTS
Tool Kit, General Mechanic, Automotive,
Main Engine Shutdown (see para. 2-10)
APU Shutdown (see para. 2-12)
Battery Switch OFF
Transmission Shift Control in N (neutral)
To replace bulb carry out steps 1 and 2 of removal procedure and steps 3 and 4 of installation
Remove screws (1) attaching instrument
Pull instrument panel free of dashboard
frame to access nuts (3) and lamp socket
(6) Pull lamp socket out of shift control (7)
and replace bulb (5).
Be sure shift lever is selected to NEUTRAL
and remove nuts (11) and screws (10)
attaching clamp (9).
Unscrew cable ferrule (12) from shift control
Remove screws (8), nuts (3), and washer
(4) Remove shift control (7).
Check transmission is in NEUTRAL and the selector is positioned to NEUTRAL before proceeding with
Install shift control (7) in panel (2) using screws (8), lockwashers (4), and nuts (3) Tighten nuts firmly.
Screw ferrule (12) into shift control cable swivel. Adjust ferrule position to accurately line up cable
sheathing clamp point with bracket (13).