|
| |
TM 5-4210-220-12
4-12. CAB - Continued
INSTALLATION
(1)
Attach mirror assembly to cab door using screws (3).
(2)
Install new grommet (2), if required, and route mirror cable through grommet.
(3)
Connect mirror cable leads to terminal block inside cab as per following table.
LEAD
TERMINAL
GREEN
G
BLACK
67
WHITE
88
REPAIR
a
Heated Mirror Repair
(1)
Carry out steps 1 and 2 of mirror assembly
REMOVAL preceding.
(2)
Disassemble the mirror (1) from the mirror arm
(3) by removing two locknuts (2).
(3)
Install new mirror to mirror arm and attach using
new locknuts (2).
(4)
Install mirror cable as detailed in mirror assembly
INSTALLATION Instruction steps 2 and 3
preceding.
b
Marker Light Lens and Bulb Repair.
(1)
Remove two locknuts (2) and disassemble mirror
(1) from mirror arm (3).
(2)
Remove six screws (4) attaching lens (5)Discard
lens if it is cracked or broken.
(3)
Replace burned-out or damaged bulbs (6).
(4)
Install marker light lens using screws (4).
(5)
Install mirror to mirror arm using two new
locknuts (2).
4-81
|
