4-11 HEAT SHIELDS - Continued
Remove the capscrew (4) and nut (5) that retains the heat shield to the support.
Leave the four corner capscrews fingertight, and completely remove the rest.
While supporting the heat shield remove the four corner capscrews and lower hose body heat shield to the
Apply sealant (item 25, Appendix B) to the perimeter of each mating surface during assembly.
Slide the hose body heat shield under the truck. Raise and support the heat shield.
Install capscrews (1) attaching the hose body heat shield (2) to the hose body compartments (3) and
tighten to 8 ft lb (11 Nm).
Install the capscrew (4) and nut (5) that retains the heat shield to the support.
Install the capscrews that retain the hose body heat shield to the inside of the wheel well.
Repair hose body heat shield as detailed in para. 4-11.1 REPAIR.