|
| |
TM 5-4210-220-12
Table 4-1. Unit PMCS - Continued
W - Weekly
M - Monthly
S - Semi-Annually
M - Monthly
B - Bi-Annual
ITEM
ITEM TO BE INSPECTED/PROCEDURE
NO.
W
M
S
A
B
51
ENGINE STARTER:
Remove oil caps and add 8 drops of engine oil, (item 17, Appendix E)
to the oil wicks.
52
EXHAUST SYSTEM:
Check the exhaust system manifold retaining nuts, and clamps for
tightness. Remake/tighten any leaking connections. Replace exhaust
components if manifold, muffler, or pipes have holes.
53
AIR BOX DRAINS:
With the engine running check there is a flow of air in the air box drain
tubes. Clean tubes as required.
54
GOVERNOR:
Check and record the engine idle speed and the maximum engine
no-load speed.
55
ENGINE AND TRANSMISSION MOUNTS:
Check the engine and transmission mounts, and mounting bolts. Tighten
bolts as required.
56
TRANSMISSION SHIFT LINKAGE:
Inspect transmission shift linkage cable. Adjust as required. Apply a few
drops of engine oil to both ends of the cable.
57
TRANSMISSION BREATHER:
Inspect the breather mounted on top of the torque converter housing
Clean as required.
58
TRANSMISSION SHIFT CHANGE:
Subtract 100 rpm from the maximum engine no-load speed. While
accelerating in the 2-5 range, at full throttle check upshift occurs when
engine speed equals the speed noted above.
4-16
Interval
|
