|
| |
TM 5-4210-220-12
2-10. OPERATING THE VEHICLE.
a
Starting the Engine
(1)
Set battery switch (1) to BOTH.
(2) Be sure that the parking brakes are engaged, i e, the brake control button (2) is pulled OUT.
(3)
Be sure that the transmission shift lever (3) is in N (neutral) position. The transmission neutral start switch
prevents starting unless the transmission is in neutral.
NOTE
Prime the engine fuel system if the engine falls to start. Depress the prime button (4) for 10 to 20
seconds
If the engine falls to start after priming and several starting attempts, consult the troubleshooting chart in Chapter 3,
Section II.
(4)
Turn the ignition switch (5) to ON.
(5)
Depress the start button (6) until the engine starts or a maximum of 30 seconds. If the engine falls to start,
wait one to two minutes and repeat the starting attempt. Waiting between starting attempts is necessary to prevent
overheating of the starter motor.
2-45
|
