|
| |
TM 5-4210-220-12
Section III. OPERATING PROCEDURES.
2-8. ASSEMBLY AND PREPARA. TION FOR USE.
Before starting, driving, and testing the truck carry out oil and lubricant inspection as detailed in Lube Order LO 5-4210-
220-12, fuel up the truck, and fill water and foam tanks.
2-9. INITIAL ADJUSTMENTS.
All subsystems and components requiring adjustments are pre-set by the manufacturer and no special procedures are,
therefore, required. Carry out all routine checks and inspections as detailed in Operator's PMCS Procedures, see para.
2-7.
2-44
|
