This manual lists repair parts, special tools, test,
Item procured and stocked for anticipated or
measurement, diagnostic equipment (TMDE), and other
support equipment required for operation and
Item procured and stocked for insurance purpose
performance of organizational, direct support, and
because essentiality dictates that a minimum
general support maintenance of the Truck, Fire Fighting.
quantity be available in the supply systems.
Item procured and stocked and which otherwise
would be coded PA except that it is
deteriorative in nature.
a. Section II-Repair Parts List. A list of repair parts
Support item, excluding support equipment,
authorized for use in the performance of maintenance.
procured for initial issue or outfitting and
The list also includes parts which must be removed for
stocked only for subsequent or additional
replacement of the authorized parts. Parts lists are
initial issues or outfittings. Not subject to
composed of functional groups in ascending numerical
Support equipment procured and stocked for
sequence, with the parts in each group listed in figure
initial issue or outfitting to specified
and item number sequence. Bulk materials are listed in
maintenance repair activities.
FSN sequence, as the last group in Section II.
Support equipment which will not be stocked but
b. Section III-Special Tools List. "Not Applicable".
which will be centrally procured on demand.
Item procured and stocked to provide for
c. Section IV-National Stock Number and Part
sustained support for the life of the
Number Index. A list, in ascending numerical sequence,
equipment. It is applied to an item peculiar to
of all National stock numbers appearing in the listings,
the equipment which, because of probable
followed by a list, in alphanumeric sequence, of all part
discontinuance or shutdown of production
numbers appearing in the listings.
facilities, would prove uneconomical to
number and part numbers are cross-referenced to each
reproduce at a later time.
An item of a depot overhaul/repair kit and not
illustration figure number and item number appearance.
purchased separately. Depot kit defined as a
kit that provides items required at the time of
3. Explanation of Columns
overhaul or repair.
The following provides an explanation of columns found
An item of a maintenance kit and not purchased
in the tabular listings:
separately. Maintenance kit defined as a kit
that provides an item that can be replaced at
a. Illustration. This column is divided as follows:
organizational or intermediate levels of
(1) Figure number.
Indicates the figure
number of the illustration in which the item is shown.
Item included in both a depot overhaul/repair kit
(2) Item number.
The number used to
and a maintenance kit.
Item to be manufactured or fabricated at
identify each item called out in the illustration.
b. Source, Maintenance, and Recoverability Codes
Item to be manufactured or fabricated at the direct
support maintenance level.
(1) Source code. Source codes are assigned
Item to be manufactured or fabricated at the
general support maintenance level.
to support items to indicate the manner of acquiring
Item to be manufactured or fabricated at the depot
support items for maintenance, repair, or overhaul of
end items. Source codes are entered in the first and
Item to be assembled at organizational level.
second positions of the Uniform SMR Code format as
Item to be assembled at direct support
Item to be assembled at general support
Item to be assembled at depot maintenance level.
Item is not procured or stocked because the
requirements for the item will result in the
replacement of the next higher assembly.
Item is not procured or stocked. If not available
through salvage, requisition.
A support item that is not stocked. When
required, item will be procured through normal