Drain Line Valve, Removal and Disassembly

25. Hose Reel Valves, Tank Fill Valve, and Tank

Suction Valve, Reassembly and Installation

b. Inspection. Inspect all parts for wear, defects,

a. Reassembly. Refer to figure 3 and reassemble

and damage.

the hose reel valves, tank fill valve, and tank suction

c. Repair. Replace or repair worn, defective, or

valve in the reverse order.

damaged parts as necessary.

b. Installation. Refer to figure I and install the hose

reel valves, tank fill valve, and tank suction valve on the

31. Drain Line Valve, Reassembly and Installation

pump assembly.

a. Reassembly. Refer to figure 5 and reassemble

the drain line valve in the reverse order.

26. Water Tank Drain Valve, Removal and

b. Installation. Install the drain line valve (TM[ 5-

Disassembly

4210-205-12).

a. Removal. Remove the water tank drain valve

(TI 5-4210-205-12).

32. Relief Valve Control, Removal and Disassembly

b. Disassembly. Refer to figure 4 and disassemble

a. Removal. Remove the relief valve control (T.I

the water tank drain valve.

5-4210-205-12).

b. Disassembly. Refer to figure 6 and disassemble

27. Water Tank Drain Valve, Cleaning, Inspection,

the relief valve control.

and Repair

a. Cleaning.

Clean all parts in an approved

33. Relief Valve Control, Cleaning, Inspection, and

cleaning solvent and dry thoroughly.

Repair

b. Inspection. Inspect all parts for wear, defects,

a. Cleaning.

Clean all parts in an approved

and damage.

cleaning solvent and dry thoroughly.

c. Repair. Replace or repair worn, defective, or

damaged parts as necessary.

Caution: Do not use abrasives.

28. Water Tank Drain Valve, Reassembly and

b. Inspection.

Installation

a. Reassembly. Refer to figure 4 and reassemble

(1) Inspect piston before placing in body.

water tank drain valve in the reverse order.

(2) Inspect all parts for wear, defects, and

b. Installation. Install the water tank drain valve

damage.

(TM 5-4210-205-12).

c. Repair. Replace or repair worn, defective, or

29. Drain Line Valve, Removal and Disassembly

damaged parts as necessary.

a. Removal. Remove the drain line valve (TM

5421205-12).

34. Relief Valve Control, Reassembly and

b. Disassembly. Refer to figure 5 and disassemble

Installation

the drain valve.

a. Reassembly. Refer to figure 6 and reassemble

the relief valve control in the reverse order.

30. Drain Line Valve, Cleaning, Inspection, and

b. Installation. Install the relief control valve (TM

Repair

54210-205-12).

a. Cleaning.

Clean all parts in an approved

cleaning solvent and dry thoroughly.

INDEX TO FIGURE 2

1 Pipe plug

8 Nut, 3/8-24

15 Packing

2 Pipe plug

9 Setscrew, 5/16-24 x 3/8 in.

16 Nut, 7/8-20

3 Packing

10 Handle

17 Ball

4 Screw, cap, 3/8-24 x 1 in. (6 rqr)

11 Stop

18 Pivot

5 Cover

12 Pin

19 Spring

6 Gasket (3 rqr)

13 Retainer (2 rqr)

20 Body

7 Packing

14 Collar

TAGO 5947-A