Quantcast Flasher Assembly

 

Click here to make tpub.com your Home Page

Page Title: Flasher Assembly
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Figure 39. Beacon warning light, exploded view.
Up
TM-5-4210-205-12 Truck Fire Fighting; Powered Pumper; Foam and Water 500 G.M.P.; Centrifugal Pump Power Take Off Driven; 400 Gal. Water Tank 40 Gal. Manual
Next
Figure 42. Engine oil pressure sending unit, removal and installation.
Figure 40. Underhood lights, removal and
installation.
89. Flasher Assembly
a. Removal. Refer to figure 44, and remove the
flasher assembly from the fire truck control panel.
Figure 41. Siren solenoid relay, removal and
b. Cleaning, Inspection, and Repair.
installation.
(1) Clean  all  parts  with  a  clean  cloth
dampened in an approve(d cleaning
c. Installation. Refer to figure 45, and install the
solvent, and dry thoroughly.
circuit breakers on the cab fire wall.
(2) Inspect all parts for damaged or defective
91. Beacon Warning Light Switch
condition.
(3) Replace or repair damaged or defective
a. Removal. Refer to figure 46, and remove the
beacon warning light switch from the instrument panel.
parts as necessary.
c. Installation. Refer to figure 44, and install the
b. Cleaning, Inspection, and repair.
flasher assembly on the fire truck control panel.
(1) Clean  all  parts  with  a  clean  cloth
dampened  in  an  approved  cleaning
90. Circuit Breakers
solvent, and dry thoroughly.
a. Removal. Refer to figure 45, and remove the
(2) Inspect all parts for damaged or defective
circuit breakers from the cab fire wall.
condition.
(3) Replace or repair damaged or defective
b. Cleaning, Inspection, and Repair.
parts as necessary.
(1) Clean  all  parts  with  a  clean  cloth
c. Installation. Refer to figure 46, and install the
dampened  in  an  approved  cleaning
siren light switch on the instrument Panel.
solvent, and dry thoroughly.
(2) Inspect all parts for damaged or defective
92. Siren Light Switch
condition.
a. Removal Refer to figure 46, and remove the
(3) Replace or repair damaged or defective
siren light switch from the instrument panel.
parts as necessary.
65

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.