|
| |
TM 10-4210-235-13
4-13. ACCESSORIES REPLACEMENT
This task covers a. Removal b Installation
INITIAL SETUP
Tools
General Safety Instructions
General Mechanics Tool Kit, Appendix B, Section III,
WARNING
item I
Drill, Appendix B, Section III, item 2
Keep safety solvent cleaner away from sparks or
flame. The safety solvent cleaner is flammable and
Materials/Parts
the vapors can be explosive.
Lock Washers (2), Appendix H, item 1
· Use safety solvent cleaner in a well ventilated area.
Wear gloves and eye protection when using solvent
Safety Solvent Cleaner, Appendix E, Section II, item 1
cleaner. Repeated or prolonged skin contact or
inhalation of solvent cleaner vapors can be toxic.
Rags, Appendix E, Section II, item 2
Adhesive, Appendix E, Section II, item 3
a.
Removal (See figure 4-7.)
NOTE
Crank can be found on both the trailer hose reel assembly and the auxiliary hose assembly
The level gage and installation are found only on the trailer hose assembly.
(1)
Remove wing nut (1), flat washer (2), and crank (3).
(2)
Remove pad (4) if damaged (a) Carefully pull pad (4) from frame (5).
(b)
Scrape off any remaining pad (4) material being careful not to scratch the frame (5) surface
WARNING
·
Keep safety solvent cleaner away from sparks or flame The solvent cleaner is flammable
and the vapors can be explosive.
·
Use safety solvent cleaner in a well ventilated area Wear gloves and eye protection when
using solvent cleaner Repeated or prolonged skin contact or inhalation of solvent cleaner
vapors can be toxic.
(c)
Remove any adhesive remaining on frame (5) surface using safety solvent cleaner and a stiff brush
or rag.
(d)
Be sure frame (5) surface is clean and free of any dirt or oils
4-20
|
