|
| |
TM 10-4210-235-13
5-9. SKID FRAME REPLACEMENT AND REPAIR. - continued
Figure 5-5. Skid Frame
c.
Installation
(1)
Install two keepers (4), screws (3), lock washers (2), and nuts (1).
WARNING
Frame can swing while suspended from a lifting device causing injury to personnel and/or
damage to equipment.
(2)
Using lifting device, lift skid frame (10) and lower onto trailer (11).
(3)
Install 10 hold down clamps (9), screws (8), flat washers (7), lock washers (6), and nuts (5).
(4)
Install slide buttons, pads, and bushings. See paragraph 4-25.
(5)
Install rods See paragraphs 4-22 and 4-24.
5-10
|
