|
| |
TM 10-4210-235-13
c.
Assembly
(1) Coat mating surfaces of frame (8) and pad (7) with adhesive. Let both surfaces air dry until adhesive is
tacky but will not stick to fingers.
(2)
Carefully attach pad (7) to frame (8). Press into firm contact all over.
(3)
Install 16 slide buttons (6), screws (5), flat washers (4), new lock washers (3), and nuts (2).
(4)
Install two bushings (1).
(5)
Install cylinders per paragraph 4-11.
(6)
Install rods per paragraphs 4-22 and 4-24.
Figure 4-27. Skid Frame Repair Items
4-63
|
